Using Velrisa Clear safely

This guide covers essential precautions. It does not replace the official manual for the specific version delivered.

Before installation

• Use only on smooth, vertical, framed, uncracked glass without special coatings.
• Do not use on frameless glass, glass doors, in the rain or in wet conditions.
• Check that the cleaning pads are clean, securely attached and comply with the manual.
• Attach the safety rope to a secure anchor point.
• Connect the robot to mains power and ensure the cable and rope can move freely with the robot.

During use

Stay nearby. Check suction before letting go of the robot. Do not lean outside to position it. At the end of the cycle, hold the robot firmly before removing it, then switch off the power as directed by the manual.

Backup battery

The robot is not cordless. The backup battery only maintains adhesion temporarily during a power failure; it must not be used to continue cleaning.

Maintenance and results

Remove and clean the microfibre pads according to the manual. Very dirty or wet pads can interfere with adhesion. You may need to finish corners or stubborn dirt by hand.

Not sure about your window dimensions or compatibility? Ask us before ordering.